Mar 30

01-Technical Interview questions-how to prepare for technical interview-job interview-getting a job

  • What is the Material composition in IBR tubes?

Carbon max………………… 0.10%

Manganese max……………. 0.60%

Nickel max…………………. 0.25%

Sulphur max………………… 0.050%

Phosphorus max…………….. 0.050%

 

  • What is the difference between P11 & P22 pipes?

P11 the chromium molybdenum composition that is 1% ofchromium and 1/4% of molybdenum

P12 the chromium molybdenum composition that is 1% ofchromium and 2% of molybdenum

 

  • 1st law of Thermodynamics

a. HEAT AND MECHANICAL WORK ARE MUTUALLY CONVERTABLE.

b. ENERGY CAN BE CREATED NOR BE DISTROYED BUT IT CAN BETRANSFERED FROM ONE FORM TO ANOTHER FORM

 

  • Difference between Unilateral tolerance and Bilateral tolerance

A unilateral tolerance is tolerance in which variation is permitted only in one direction from the specified direction.e.g. 1800 +0.000/-0.060

Bilateral tolerance is tolerance in which variation is permitted in both direction from the specified direction.e.g. 1800 +0.060/-0.060

 

  • Why we need two angle of projections ( 1st angle and 3rd angle)? Cant we standardize to one.

Generally 1 St. angle followed in India and 3rd angle projection is used in European countries. In 1st and 3rd angle projections there is no overlapping of principal planes while drawing side and top views. but in 2nd and 4th angle projections the principal planes are overlapped while drawing top and side views. It results confusion in drawing. For this reason 1st and 3rd angle projections are used commonly.

 

  • What is the difference between Corrective actions and preventive actions?

Corrective actions are taken on discrepancies noticed duringinspection of products/documents/process whereas preventiveactions are taken to eliminate the possibility ofdiscrepancy in future.

 

  • What is the Shaft coupling and its types

It is used to join two shafts for transmission motion from one shaft to another shaft,it may be either flexible or rigid type.

Rigid coupling;(Muff coupling, Flange coupling, Marinecoupling, Oldham"s coupling)Flexible coupling;(Flexible bush pin coupling)

Oldham’s Coupling is used when axis of shaft are not aligned

Other types are:

loveys joy coupling

Spider coupling

Tyre coupling

Pin and bush coupling

Fluid coupling

Vulcan coupling

Flexible coupling

Universal coupling

Articulate joints

 

  • What is meant by One ton Air conditioner, how fast it cool a room.

1 ton refrigeration means 210 kJ/min extracts heat from thesystem.

 

  • Boyle’s law

Boyle’s law describes the inversely proportional relationship between the absolute pressure and volume of a gas.

You might also like

Metallurgy Interview Questions And Answers | Metallurgy Interview Questions | Metallurgy Interview
What is the composition of Grey cast iron Grade 20? Carbon     ...

Carbon Fibre Reinforced Plastics | Carbon Fibre Reinforced Polymers Use | CFRP Applications
      The Composite’s properties are mainly influenced by the choice of...

Nano Composite Material | Calculate High Cycle Fatigue | Repeated Mechanical Stress Create Stronger Nano Composites
If someone does a lot of arm curls at the gym, the typical result is that the bones and muscles in...

Mechanical Engineering Objective | Mechanical Engineering Online Test
1. The impact strength of an material is an index of its a. Toughness b. Tensile strength c....

Tagged with:
preload preload preload